HyreMover

HyreMover tools

How long will my move take?

Type your cubic feet, the crew size and the drive. The tool adds loading, driving and unloading. Every rate is a field you can change.

Load + drive + unload the whole formula The speed of a crew is an editorial assumption, not a published rate. Ask the mover what it plans for.

The short answer

How long your move will take is loading time plus driving plus unloading. Loading time is your cubic feet divided by the crew's pace.

Example: 1,000 cu ft, 2 movers at an assumed 50 cu ft per mover-hour, a 1 hour drive and unloading at 75 percent of loading comes to about 18.5 hours. That pace is our editorial placeholder. A bigger crew cuts the clock time, not the total mover-hours.

Enter the job

Your figures, and editable assumptions labeled as ours. Nothing is emailed.

HyreMover editorial assumption, not a measured rate. Ask the mover for theirs.

HyreMover editorial assumption. Add some for stairs, no elevator, or a long walk to the truck.

HyreMover editorial assumption.

— Total time
— Loading
— Unloading and driving
— Mover-hours

What this assumed

—

A planning figure from your inputs and our labeled assumptions. Not a quote. HyreMover does not move household goods.

How this calculator works

load    = cu ft ÷ (movers × cu ft per mover-hour) × (1 + access%)
unload  = load × unload%
total   = load + drive + unload
mover-hours = total × movers

Three numbers here are ours, not published: the pace, the access add-on and the unload share. Each is a field.

What each input means

Inputs on this tool, in the order they appear on the form.
InputWhat it is actually asking
Cubic feet From the volume estimator.
Pace Cubic feet one mover loads per hour. Editorial placeholder; ask the mover.
Access Stairs, no elevator and long carries slow every trip.
Drive time Truck time between homes. Hourly bills may also add travel time to and from the depot.

Worked examples

Including one where the naive answer misleads, which is the example most calculators leave out.

1,000 cu ft, two movers

1,000 ÷ (2 × 50) = 10 h loading, 7.5 h unloading, 1 h driving: 18.5 h.

Same job, four movers

5 h loading, 3.75 h unloading, 1 h driving: 9.75 h on the clock, 39 mover-hours instead of 37.

What changes the result

The pace and cubic feet move the answer most. Stairs come next. Packing on the day is not in this formula; use the packing time calculator for that.

When not to use this

Not a quote, and not a lifting guide. Pianos, safes and hot tubs need trained crews and equipment; do not plan to move them yourself.

Related on this site

Questions this calculator answers

How many hours do movers take for a 2-bedroom?
It depends on cubic feet, access and crew size, not bedrooms. Type your cubic feet and the crew size, then ask the mover what pace it plans for and put that in the rate field.
Does a bigger crew save time?
It cuts clock time. In this formula the total mover-hours stay the same, because the work is the same. In practice, very small spaces limit how many people can work at once.
Where does the 50 cu ft per mover-hour come from?
It is a HyreMover editorial placeholder. We found no public dataset of crew speed we could cite. Replace it with the figure your mover gives you.
Why is unloading faster than loading?
Loading includes wrapping and building a tight load. We set unloading at 75 percent of loading as an editorial assumption. Change it.
What should the estimate show?
For interstate moves, the mover must survey your goods and give a written estimate covering all related services (49 CFR 375.401(a)). Ask how it estimated the hours.

Sources and methodology

Figures dated October 26, 2026. Last reviewed .

Related

Plan Your Move Back to the homepage