Quick answer
Hourly moving rates are a pricing basis in which a moving company charges for the time its crew and truck spend on your job, at a set rate per hour for a crew of a stated size, instead of charging by weight or one fixed price.
The clock usually covers loading, driving and unloading, and many companies add a minimum number of hours and a travel charge. Hourly pricing is mostly a local-move basis and is set by state rules, not by federal ones.
Quick facts
The key facts about Hourly Moving Rates, with sources:
- What you are billed for
- Crew time and truck time, counted in hours, plus any accessorial charges the contract lists 2
- Where it is common
- Local moves; California treats 100 miles or less as the range where hourly rates may apply 1
- What counts as time (California)
- Loading, unloading, and double the driving time from origin to destination 1
- Rounding (California)
- Minutes are totaled and converted to quarter-hour steps; the first 7 minutes of a fraction are omitted 1
- Minimum hours
- A mover may set a minimum; California gives four hours even if the job takes two or three as an example 1
- Who sets the rules
- The state, for a move inside one state. Federal estimate rules cover interstate moves 36
- Written estimate
- A rate per hour is not an estimate of the total in California. The booklet says verbal and online quotes are not binding, and a not-to-exceed price must be on the agreement 1
Key takeaways
- An hourly rate is a price for time, not for a move. Your final bill is the rate times the hours the contract allows, plus extras.
- The rate depends on crew size, and the clock rules decide the hours. Ask when the clock starts, when it stops, and how travel is counted.
- California counts loading, unloading and double the driving time, then rounds to quarter hours. Other states differ, so read the tariff for your state.
- A low hourly rate can still make a high bill if the crew is slow, the minimum is long, or travel time is added on top.
- Ask for a written total or a not-to-exceed figure before loading. A rate alone does not tell you what the move will cost.
Hourly moving rates in plain English
Think of a taxi that waits. You pay for time while the crew works. A mover sends a truck and a set number of workers, and the bill grows with every hour on the job. That is the whole idea.
The Texas Department of Motor Vehicles describes a mover that can charge for added “accessory or materials costs” besides a standard hourly rate, and says those charges are explained in the mover’s tariff 2.
A tariff is the list of rates and charges a licensed mover files with the state. So an hourly bill has two layers: the rate for time, and the listed extras.
Hourly pricing is mostly used for local moves. California’s consumer booklet says a move of 100 miles or less is considered local and is usually charged by the hour, while a longer move must be charged on a weight and mileage basis 1.
That line is a California rule, not a national one. A move over a state line falls under federal rules, which are written around estimates and weight.
See federal vs. state moving regulations for how the split works, and local moving for how a local job runs.
How the clock runs, step by step
Companies count time in different ways. The steps below follow the California tariff, which is one published, detailed example. Another state or company may start or stop the clock elsewhere.
- Loading time. The crew records when loading starts and ends. California requires the shipping documents to hold a legible record of start and end times for each phase of service 1.
- Driving time. California counts double the driving time from origin to destination, 1.
- Unloading time. The crew records unloading the same way.
- Add and round. California totals the minutes and converts them to hours in quarter-hour steps. The first 7 minutes of a fraction are omitted 1.
- Apply the rate and extras. The hours are multiplied by the rate for your crew size. Tolls, packing and other listed services are added if the tariff allows them 12.
- Sign and pay. You review the times on the document before you pay. Keep your copy.
- LoadingStart and end times recorded for the phase
- Driving, counted twiceOrigin to destination, doubled
- UnloadingStart and end times recorded for the phase
- Round to quarter hoursFractions follow the tariff table
- Hours times crew ratePlus extras the tariff allows
Another state or company may count differently. Ask for the clock rules in writing. Source: [1]
Parts of an hourly bill, and what each one means
| Part of the bill | What it means | What the sources say |
|---|---|---|
| Hourly rate by crew | A rate for the truck plus a stated number of workers | California’s tariff lists rates for a driver alone, a driver and a helper, and each added person 1 |
| Minimum hours | The fewest hours you pay for, even if the job is shorter | California gives a four-hour minimum on a job that takes two or three hours as an example of what a mover may charge 1 |
| Travel time | Time the truck or crew spends getting to and from the job | California counts double the driving time between origin and destination 1 |
| Overtime | A higher rate at hours when the mover pays its crew overtime | California allows time-and-a-half or double time when wage rules require the mover to pay overtime 1 |
| Tolls and materials | Costs passed through to you | California allows actual bridge and ferry tolls to be added; Texas says materials costs can be charged beyond the hourly rate 12 |
| Accessorial charges | Extra services such as stairs, long carries or hoisting | Texas says these are explained in the tariff 2. In California the hourly rate already covers flights and long carries, with no additional charge 1 |
Example: turning a day’s times into billable hours
The times below are invented to show the arithmetic. The method is the California tariff’s: loading plus unloading plus double the driving time, rounded to the tariff’s quarter-hour table. No dollar figure appears, because rates differ by company and place.
| Step | Invented time | In minutes |
|---|---|---|
| Loading | 2 hours 47 minutes | 167 |
| Unloading | 2 hours 5 minutes | 125 |
| Driving, one way | 18 minutes | 18 |
| Driving, counted twice | 2 × 18 minutes | 36 |
| Total of the three parts | 5 hours 28 minutes | 328 |
| Rounded under the tariff table | 28 minutes is over 22 but not over 37, so one half hour | Billed as 5.5 hours |
billable time = loading + unloading + (2 × driving time), rounded to the tariff’s quarter-hour table
loading- Recorded start to end of loading
unloading- Recorded start to end of unloading
driving time- One way, origin to destination
rounding- A fraction of 7 minutes or less is omitted; larger ones step up by quarters
This is the California Maximum Rate Tariff 4 method. It is shown as a worked example of a published rule, not as how every mover bills.
Source: [1]
If the same job had finished faster but fell under a four-hour minimum, the minimum would apply instead.
The only way to see which rule governs your bill is to read the minimum and the rounding on the contract.
The moving cost calculator lets you run your own hours and rate and see the total before you ask for a quote.
Where you see an hourly rate: quotes, the agreement and the time record
You first meet it in a phone or online quote that says “per hour, two movers and a truck.” You meet it again on the written agreement, where the rate, any minimum and the travel rule should appear, and on the time record the crew completes on the day.
Do not treat the phone quote as the estimate. California’s consumer booklet says a verbal or online rate quotation, such as how much per hour, is not an estimate, and that verbal and online quotes are not binding 1.
It also says that on short local jobs some movers may not give a written estimate and will quote only the hourly rate, so it suggests asking other movers for a written estimate of the total 1.
Texas takes the same view of paperwork. Its mover guide says licensed movers must give you a proposal before loading and that you should never rely on verbal agreements 2.
The booklet’s advice carries across states: get the rate, the minimum, the travel rule and a total or maximum on paper. Our moving estimates guide shows how to line up written estimates.
Moving travel fees: how travel time and trip charges are counted
Moving travel fees are the part of an hourly bill that pays for the truck and crew getting to and from your job. Rules differ by state, so the same job can be billed in different ways. Two state tariffs show the range, and neither is a national rule.
California’s Maximum Rate Tariff 4 counts loading time, unloading time and double the driving time from origin to destination.
It lists exceptions, such as a mover making more than one trip, or carrying two shipments on one truck at the same time 1.
Washington’s Tariff 15-C lets a carrier bill a local move one of two ways: the clock from when the vehicle leaves its terminal until it returns or is sent to another job, or a “flat travel time” from the terminal to the origin and from the destination back to the terminal 4.
The carrier must record which method it used on the bill of lading 4.
Washington also says a customer must not be charged for breaks or interruptions caused by the carrier’s personnel, and that a carrier that completes an estimate on the day of the move may not charge for travel time to the origin or for the time spent on the estimate 45.
Your state may have none of these protections. Ask how travel is counted and get the answer on the written agreement.
Where hourly pricing helps, and where it hurts
Where it helps
- You pay for the time used. A small, well-prepared move can finish quickly.
- Your own work lowers the bill. Boxes packed and doors clear mean fewer crew hours.
- The unit is easy to understand: hours times a rate, with a few listed extras.
- On a local job, the weight of the load does not set the price.
Where it hurts
- The total can be open-ended unless a maximum is written in the contract. California requires a not-to-exceed price on the agreement 1.
- A slow crew costs more than a fast one at the same rate, so the rate alone hides the real price.
- Minimums, travel time and rounding can add hours you did not count.
- Stairs, long carries and a disorganized home stretch the clock.
Limits: when an hourly rate is the wrong yardstick
An hourly rate compares badly across companies. A company that charges less per hour but counts travel twice, sets a longer minimum, or sends a slower crew can cost more than one that charges more per hour. Compare estimated totals, not rates.
It also does not fit a long-distance move. California’s booklet says a move over 100 miles is considered long-distance and must be charged on a weight and mileage basis 1.
For interstate moves, federal rules require a written estimate that states whether it is binding or non-binding, 6. See weight-based moving charges for the other basis, and the local vs. long-distance tool to check which side your move falls on.
Finally, an hourly rate says nothing about liability for damage. That is a separate choice on the contract. Valuation is not insurance, and the valuation and insurance guide explains the difference.
Hourly rate is not the same as a total
A rate says how time is priced. A written estimate says what the whole job is expected to cost. In California the booklet says a verbal or online rate quote is not an estimate 1. Ask for both in writing.
What drives an hourly bill, and what a quote covers
We do not publish prices. These factors move the hours and the rate. Crew size changes the rate per hour and the speed of the job. Inventory and packing state set how much there is to load.
Access matters: stairs, elevators, a long walk to the truck and parking all slow the crew. Distance between homes sets the driving time, which is doubled in California. The date and hour can trigger overtime rates where wage rules apply 1.
Ask who pays for tolls, fuel, materials and any item that needs special handling. The cost guide explains what sets the price of a move, and the labor-only moving page shows an hourly service without a truck.
None of the sources we loaded gives a validity period for an hourly quote, so we do not offer one. Ask how long the quoted rate holds and whether it can change before the date. Where a state requires written estimates, keep the dated copy.
Steps for pinning down an hourly rate before loading
A licensed company sets its own rate and files it, where the state requires that. The state may cap it. You do not need a permit to hire an hourly crew, but you do need the paperwork in order.
- Check the licence. Texas requires a household goods mover to be licensed with the TxDMV and the US Department of Transportation, and runs an online database where you can look a mover up 2.
- Ask for the tariff or rate sheet. Texas says licensed movers must have a list of rates and charges on file with the state 2.
- Describe the move the same way to each company. Stairs, long carries and heavy items change the hours.
- Get the rate, minimum, travel rule and a maximum in writing. The Texas site says a not-to-exceed proposal states the maximum price 3.
- Review the contract before loading. Texas says movers must provide it before loading 2.
- Watch the time record on the day. Ask for the start and end times before you sign.
Do not pay a demand you do not understand
If a total at delivery does not match your contract, read the contract and the applicable rule before paying, and never hand over the only copy of a document.
The signed contract and the law in your state decide the rest. For disputes, contact your state regulator or a lawyer. HyreMover moves nothing and cannot rule on a bill.
Keeping the clock honest on moving day
- Be ready when the crew arrives. Pack, label and clear paths first. Every hour spent waiting for you is an hour on the bill.
- Note the start time. Write it down when the crew begins loading, with the crew count.
- Keep paths clear and move parked cars so the truck is close to the door.
- Decide breaks in advance. Ask whether the clock runs during a break or a delay.
- Check the time record before you sign: start, end and each phase, as the California tariff requires them recorded 1.
- Keep your copies of the estimate, agreement and time record. See moving contract review.
Warning signs in an hourly quote, and when to ask for help
- A rate with no minimum, travel rule or total. The price is not yet defined.
- A rate far below every other company. The Texas guide says a bad mover may advertise a low price and then increase it after loading 2.
- No paperwork before loading. Texas lists missing paperwork as a red flag 2.
- A clock that starts before the crew reaches you, or has no end time on the record.
- New charges at delivery that were not in the contract.
If one of these appears, stop and ask for the term in writing. Read avoiding moving scams and choosing a moving company. Contact your state regulator or a lawyer for a dispute.
Rules: who regulates hourly pricing, and where each rule applies
State rules (California, intrastate). California’s Maximum Rate Tariff 4, effective January 1, 2023 in the copy we read, sets maximum fixed rates in dollars per hour for shipments of 100 miles or less, with straight time, time-and-a-half and double time, and Item 36 sets how time is computed 1.
The booklet inside it says movers normally do not exceed the maximums and most charge less 1. The tariff is a ceiling set by the state, not a price list.
State rules (Texas, intrastate). Texas requires licensed movers to have a tariff on file with the state and to give a written proposal before loading, as a binding proposal or a not-to-exceed proposal 23.
Federal rules (interstate). 49 CFR 375.401 requires a written estimate before the bill of lading, which must say whether it is binding or non-binding, and the mover may not charge for a non-binding one 6.
A binding estimate must state on its face that it binds both parties 7. These rules cover interstate household goods moves. They do not set an hourly rate.
Other states. Each state sets its own rules for moves inside it, and they vary. Check your state’s household goods regulator before you rely on any of the above.
Hourly rates vs the other ways to price a move
| Basis | You pay for | Where it fits | Main risk |
|---|---|---|---|
| Hourly rate | Time on the job, by crew size | Local moves; see local moving | An open-ended total unless a maximum is written down |
| Flat-rate moving | One agreed total for described services | Moves that can be sized in advance | Services outside the description cost extra |
| Weight-based charges | Weight and distance on the tariff | Interstate and long-distance moves | Final weight can differ from the estimate |
| Labor-only help | Time of workers, no truck | Loading or unloading you arrange yourself | Transit risk moves to you |
Hourly rate myths
- Myth A low hourly rate means a cheap move.
- Reality The rate is only half the bill. Hours, minimums, travel and extras decide the total, so compare written totals.
- Myth The clock starts when the crew arrives at my door.
- Reality Not always. California counts loading, unloading and double the driving time between origin and destination 1. Other companies and states differ. Ask.
- Myth An hourly quote over the phone protects me.
- Reality California’s booklet says a verbal or online rate quote is not an estimate and is not binding 1.
Hourly rate rules differ between California, Texas and other states
The variable is the state regulator and what it requires. California’s Bureau of Household Goods and Services publishes maximum rates and the hourly time rules 1.
The Texas Department of Motor Vehicles requires a licence, a tariff on file and a written proposal before loading 2. Other states differ, and some publish no rate cap. Start with your own state’s household goods regulator.
When hourly pricing makes sense, and the next step
Hourly pricing makes sense when the move is local, your home is ready, access is simple and you can get the rate, minimum, travel rule and a maximum in writing. It makes less sense when the load is large, access is hard, or you cannot get a written total.
Your next step is to describe the move the same way to two or three licensed companies and ask each for the same five items: rate by crew size, minimum, how travel is counted, overtime rule and a written total or maximum.
Then run your own numbers in the moving cost calculator and read moving accessorial services for the extras.
- If The move is local and the home is packed and ready
- Then Hourly can work. Ask for the rate, minimum, travel rule and a written maximum 1
- If The move is more than 100 miles in California
- Then The tariff says a weight and mileage basis applies 1
- If The move crosses a state line
- Then Federal estimate rules apply; ask for a written estimate that says binding or non-binding 6
- If You cannot get a written total or maximum
- Then Compare other companies before you book; Texas says never to rely on verbal agreements 2
- If Access is hard or the load is heavy
- Then Ask how the quote treats stairs and heavy items before you compare rates
Questions about Hourly Moving Rates
What does an hourly moving rate include?
It covers the time of a truck and a crew of a stated size. Whether it also covers travel, packing materials, tolls or stairs depends on the contract and the mover’s tariff. Texas says materials and accessory costs can be charged besides a standard hourly rate. Ask for each item in writing.
Do movers charge for travel time?
Many do, but the method varies. California’s tariff counts loading, unloading and double the driving time between origin and destination. Other companies and states count travel from the office or add a flat trip charge. Ask when the clock starts and stops, and get it on paper.
Is there a minimum number of hours?
Often. California’s consumer booklet says a mover may charge a minimum of four hours even if the move takes two or three. Minimums are set by the mover and the state. Ask for the minimum before booking and check that it is on the agreement.
How does a mover round the time?
It depends on the tariff. California totals the minutes and converts them to quarter hours: a fraction of 7 minutes or less is omitted, over 7 up to 22 is a quarter hour, and so on. Another company may bill in half hours or full hours.
Is an hourly quote a binding estimate?
No. California’s booklet says a verbal or online rate quotation, like a price per hour, is not an estimate and is not binding. A written total or a not-to-exceed proposal sets a limit. Ask for one before the crew loads.
Do hourly rates apply to long-distance moves?
Generally not. California says a move over 100 miles is long-distance and is charged on a weight and mileage basis. Interstate moves follow federal estimate rules. See the weight-based charges page for how that basis works.
Can the hourly rate change on moving day?
Not without your agreement in writing where the rules protect you. Texas says an agreed price can change after loading only if both parties agree in writing. California requires a change order for added services. Read before you sign anything new.
Why do movers charge overtime?
Some companies pay their crew a higher rate at certain hours and pass that on. California’s tariff allows time-and-a-half or double time only when the mover must pay overtime under wage rules. Ask whether your date or hour triggers it.
How do I compare hourly quotes from two companies?
Compare the same five items: rate by crew size, minimum hours, travel rule, overtime and a written total or maximum. A lower rate with a longer minimum can cost more. The moving estimates guide shows how to line quotes up.
Where do I report an hourly billing dispute?
Start with the mover in writing, then contact the household goods regulator in your state. Texas offers mediation through the TxDMV. For an interstate move, the federal consumer complaint process applies. A lawyer can advise on a contract dispute.
Sources
- California Bureau of Household Goods and Services, Maximum Rate Tariff 4 (effective January 1, 2023), Items 16, 36, 108, 140, 320 and consumer booklet (Item 470), retrieved .
- Texas Department of Motor Vehicles, Smart Buyer Series: Smart Mover, Tips for a Safe and Successful Household Goods Move (January 2025), retrieved .
- Texas Department of Motor Vehicles, Don’t Make a Move Without Us, retrieved .
- Washington Utilities and Transportation Commission, Tariff 15-C, Household Goods, Items 205, 230, 240 (effective Jan. 1, 2026), retrieved .
- Washington State Legislature, WAC 480-15-630, Estimates, retrieved .
- 49 CFR 375.401, Must I estimate charges? (read in the eCFR and at Cornell LII), retrieved .
- 49 CFR 375.403, How must I provide a binding estimate? (read at Cornell LII), retrieved .
Expert review
Written by the HyreMover Research Desk. Not yet reviewed by an outside expert. We say so rather than imply a review that has not happened; see our editorial policy.
How the numbers were checked: Tariff items, booklet text and proposal rules were read in the California Maximum Rate Tariff 4 PDF, the TxDMV Smart Mover guide and Don’t Make a Move page, and 49 CFR 375.401 and 375.403 in the eCFR and at Cornell LII; the tariff, guide and Washington sources were re-read on 2026-10-15.
The worked example uses invented times with the California tariff’s method. No price is given. Rules are state-specific and are not legal advice.
Suggest a correction. We fix errors and say what changed.