HyreMover

Quick answer

Weight-based moving charges are a pricing basis in which a moving company bills the transportation part of a move by the weight of your shipment, using a rate from its tariff, such as a rate per 100 pounds, plus any listed extra services.

On an interstate move under a non-binding estimate, the weight must be found on a certified scale before charges are set. A binding estimate fixes the price, so weight does not change it.

Quick facts

The key facts about Weight-Based Moving Charges, with sources:

What you are billed for
The weight of the shipment times the tariff rate, plus listed accessorial services 110
When weight sets the price
A non-binding estimate: final charges follow actual weight and the tariff in effect 1
When it does not
A binding estimate: the weight of the shipment does not affect the charges 10
How weight is found
On a certified scale, by an origin weigh or a back weigh, with a weight ticket 56
Your right
To watch every weighing, and to ask for a reweigh before unloading at no charge 810
Cap at delivery
No more than 110 percent of a non-binding estimate may be required at delivery 3
Unit used in one state tariff
California’s tariff states distance rates in dollars per 100 pounds 12

Key takeaways

  • Weight-based pricing is the basis behind a non-binding interstate estimate. The mover weighs the load and applies a tariff rate to that weight.
  • A non-binding estimate predicts the cost. The final charge follows the actual weight, but you cannot be made to pay more than 110 percent of that estimate at delivery.
  • A binding estimate fixes the price for the listed goods and services, so the scale weight does not change it.
  • You may watch every weighing, and you may ask for a reweigh before unloading. The mover cannot charge for the reweigh.
  • Ask how a volume estimate was turned into weight. Federal rules require that formula in writing.

Weight-based moving charges in plain English

Think of freight. The more your belongings weigh, and the farther they travel, the more the transportation costs. A mover that prices by weight puts your load on a scale, finds the pounds, and multiplies by a rate. That is the whole idea.

The Federal Motor Carrier Safety Administration booklet calls the transportation part of the bill the “line-haul charges” 10. The rate itself is not set in your head or on a sales call.

It comes from the mover’s tariff, which is the published list of its rates and charges. The same booklet says a mover must give you written notice about access to its tariff 10.

The tariff is where accessorial charges, such as stairs or long carries, are defined too. See moving accessorial services for how those extras are named and billed.

Weight-based pricing sits between the other bases. An hourly rate charges for time, and a flat rate charges one agreed total. Weight charges follow the pounds. Our cost guide explains what moves the price on any basis, and the moving cost calculator turns your own inputs into a planning figure. It is not a quote.

How weight becomes a bill, step by step

The steps below follow the federal rules for an interstate move on a non-binding estimate. A move inside one state follows that state’s rules, which may differ.

  1. A written estimate. The mover must do a physical survey, on site or by video, and give you a written estimate before the bill of lading 1. If it estimates by volume, it must explain in writing how volume becomes weight 1.
  2. The estimate says what weight will do. A non-binding estimate must state that final charges follow actual weight and the tariff, and that you will not be asked to pay more than 110 percent at delivery 2.
  3. The truck is weighed. The mover must weigh each shipment on a certified scale before it charges anything 5. In an origin weigh, the empty truck is weighed first and the loaded truck second 6.
  4. You may watch. The mover must tell you where and when each weighing happens and give you a reasonable chance to be there 8.
  5. Weight tickets are signed. Each weighing produces a ticket signed by the weighmaster, and a copy goes with your bill of lading 10.
  6. The tariff rate is applied. The weight, the rate and the listed extras make the charge. Delivery follows the 110 percent rule 3.
Process From estimate to bill on a non-binding interstate move
  1. Survey and written estimateVolume converted to weight in writing
  2. Empty truck weighedTare weight, pads and equipment aboard
  3. Loaded truck weighedGross weight; the difference is your shipment
  4. Weight ticket signedCopy goes with the bill of lading
  5. Tariff rate appliedPlus listed accessorial services
  6. DeliveryNo more than 110 percent of the estimate required

A binding estimate skips the weighing as a price step, because the price is already fixed. Source: [5] [6] [10]

Where weight enters the price, and where it does not

Each row is a rule or a defined term. Where a state differs, the state’s own tariff controls on a move inside that state.
SituationWhat weight doesWhat the source says
Non-binding estimateFinal charges follow the actual weight“You will base the final charges upon the actual weight” of the shipment and the tariff in effect 1
Binding estimateNothing for the charge: the price is fixed for the listed goods and services“The weight of the shipment will not affect the charges you will pay” 10. Weight can still matter for liability under full value protection 11
Estimate given by volumeVolume is converted to weight with a stated formulaThe formula must be explained in writing, and the estimate must say final charges follow actual weight 1
Minimum weight chargeA floor under the billThe mover must state the minimum cost on the bill of lading; if it does not, it must use the actual weight 10
Origin weighWeight is loaded truck minus empty truckTare before loading is subtracted from gross after loading 6
Back weighWeight is found at the destinationLoaded truck is weighed on arrival, then weighed empty after unloading 610
Shipment of 3,000 pounds or lessA simpler weighing is allowedA platform or warehouse certified scale may weigh it before loading or after unloading 7
Partial deliveryWeight sets the share that may be collectedOnly a prorated percentage of the weight delivered may be demanded 3

Example: reading a truck weighing and the 110 percent rule

All numbers below are invented to show the method. The weighing follows 49 CFR 375.509 and the delivery cap follows 375.407. No rate or dollar figure is given, because rates come from each mover’s tariff.

StepInvented figureWhat it means
Empty truck, with pads and equipment aboard28,640 lbTare weight, taken before loading
Loaded truck34,880 lbGross weight, taken after loading
Your shipment34,880 − 28,640 = 6,240 lbThe weight the tariff rate is applied to
In hundred-pound units6,240 ÷ 100 = 62.4California’s tariff states distance rates per 100 pounds 12
Estimate (non-binding)100 units of moneyA stand-in so no real price appears
Most the mover may require at delivery110 units110 percent of the estimate 3
Charges from the actual weight, if higher125 unitsThe remaining 15 units are billed after delivery 10
Formula The weight arithmetic

shipment weight = gross weight − tare weight; line-haul charge = weight × tariff rate

gross weight
Truck weight with your goods aboard, from the weight ticket
tare weight
Empty truck weight with pads, dollies and equipment aboard
tariff rate
The mover’s published rate for that distance and weight
delivery cap
On a non-binding estimate, 110 percent of the estimate

The subtraction is the origin weigh in 49 CFR 375.509(a). The rate and any minimum weight come from the tariff and the bill of lading.

Source: [6] [10]

If the load had been delivered in two parts, only the prorated share could be asked for at the first drop.

The regulation’s own example is 2,500 pounds delivered out of 5,000, which allows 50 percent of not more than 110 percent of the estimate 3.

To see how your own inventory might weigh, start with the volume estimator.

Where you see it: the estimate, the bill of lading and the weight ticket

You meet weight pricing first on the written estimate. A non-binding estimate has to say it is not binding and that you will not be required to pay more than 110 percent of it at delivery 2. If the estimate came from a volume count, the conversion formula sits next to it 1.

Next is the bill of lading, the contract for the move. Federal rules require it to state the terms for paying the total charges, including notice of any minimum charge, and the maximum amount the mover will demand at delivery 4.

It must also describe minimum weight or volume charges that apply to the shipment 4.

If the mover does not print the minimum rates, its tariff must say how final charges are computed from actual weight or volume 4. See bill of lading for the whole document.

The last place is the weight ticket. The FMCSA booklet lists six items each ticket must carry: the name and location of the scale, the date, the entries labeled tare, gross or net, the vehicle identification, your last name, and the shipment or bill of lading number 10.

The tickets must be presented with the invoice 10. When you hold the estimate, the bill of lading and the tickets together, you can check the bill line by line.

Where weight pricing helps, and where it hurts

Where it helps

  • The price follows what is actually on the truck, so a lighter load costs less than the estimate predicted.
  • The weight is measured on a certified scale, a method you can watch and ask to be repeated.
  • Federal rules put a ceiling on what can be required at delivery under a non-binding estimate.
  • Decluttering has a direct effect: fewer pounds mean a smaller line-haul charge.

Where it hurts

  • The total is not known until the truck is weighed, unless you hold a binding estimate.
  • A volume-based estimate can differ from the scale weight, and the gap is yours to pay up to the cap.
  • Minimum weight charges can make a small load cost more per pound.
  • Extras and valuation charges sit on top of the weight charge, so the rate alone does not tell the total.

Limits: what weight cannot tell you

Weight does not capture effort. A third-floor walk-up, a long carry from the truck to the door, or a piano can take hours without adding many pounds.

Those costs arrive as accessorial charges, not as weight 1. Under federal rules the mover must work out charges for services such as elevators and long carries before it prepares the bill of lading 1.

Weight also does not set how fast your goods arrive or how well they are protected. For delivery timing, see the moving delivery window. For loss and damage, weight enters liability in two places. Under the released rate, recovery is counted per pound per article.

Under full value protection with no declared value, the minimum valuation is the higher of $6,000 or $6.00 times the shipment weight 11. That is a separate choice, explained in released value protection.

Finally, weight pricing is a poor fit for a short local job. The Arizona Attorney General says in-state moves are usually based on hourly charges, so the scale may never appear 14. The local vs. long-distance tool shows which side your move falls on.

A weight estimate is not a weight guarantee

A non-binding estimate predicts weight and cost. A binding estimate promises a price. Only the scale decides the actual weight, and the 110 percent rule limits what can be required at delivery 310.

What drives a weight-based bill, and how long a quote lasts

We do not publish prices. These are the factors that move a weight-based total. The first is weight itself, which depends on how much you own, how it is packed, and what you decide to leave behind. The second is distance.

California’s tariff, for one, lists distance rates in dollars per 100 pounds by mileage band and minimum weight bracket 12. The third is the minimum weight charge, which sets a floor for small loads 10.

The fourth driver is the extras: stairs, long carries, shuttles, packing and storage, all defined in the tariff 10. The fifth is the liability level you choose, since full value protection raises the cost above the base transportation charge 10. The valuation calculator shows how declared value changes the picture.

Paper has a life of its own. A mover must keep a copy of each non-binding estimate for at least one year, attached to the bill of lading contract 2.

The bill of lading is kept for at least one year too 4. No loaded source gives an expiry date for a quote, so ask how long the quoted rate holds.

For a plan to compare totals, use the moving estimates guide.

Who weighs the truck, and what you should do at each step

The mover or its driver arranges the weighing. You do not need a permit. You need to know your rights and keep your copies.

  1. Ask where and when. The mover must tell you where and when each weighing will occur 8.
  2. Decide whether to attend. You may waive the right to observe, but the waiver must be in writing 10.
  3. Check the conditions. Pads, dollies, hand trucks and ramps must be aboard, the driver and others off the truck, and the fuel tanks full, or, on an origin weigh, no fuel added between the weighings 6.
  4. Collect the ticket. Ask for a copy of each weight ticket, signed by the weighmaster, to travel with your bill of lading 10.
  5. Ask for notice of the weight. On a collect-on-delivery move, a shipper who asks and gives contact details must be told the actual weight and charges, at least one full 24-hour day before delivery is tendered, with limited exceptions 9.
  6. Request a reweigh if the number looks wrong. You may ask before the shipment is unloaded. There is no charge, but the final bill uses the reweigh weight even if it is higher 10.

Do not pay a demand you do not understand

If a charge at delivery does not match the estimate, the weight tickets and the bill of lading, read them and the rule before paying. Never hand over the only copy of a document.

If a mover will not unload unless you pay an amount you are not required to pay, FMCSA says to contact it right away at (888) 368-7238 10. The signed contract and the law decide the rest; ask the regulator or a lawyer.

Keeping the weight honest: what you can do before and on the day

  • Decide what stays. Weight is price. A sorted home is a lighter load. Our decluttering guide covers how.
  • Describe the home the same way to every mover. The estimate is built on what you show. Add the garage, shed and attic.
  • Count the number of trucks. If your shipment travels on more than one truck, the mover may collect for each portion as delivered or wait for the whole 10.
  • Be present or send someone. The booklet lists being available at pickup and delivery as your responsibility 10.
  • Keep every document. The estimate, the bill of lading, the inventory and each weight ticket. Photograph them.
  • Compare tickets with the invoice. The tickets must be presented with the invoice 10. Check names, dates and the bill of lading number.

Warning signs on a weight-based bill, and when to ask for help

  • A quote by phone or email with no survey. The Tennessee Attorney General advises steering clear of a mover that estimates by phone or email, or that will set charges after loading 15.
  • A “binding” price that rises without a weighing. The Surface Transportation Board says a mover that calls an estimate binding, never weighs, and charges more has turned it into a non-binding move, and that this is prohibited 11.
  • No chance to watch the weighing, or no weight ticket with the paperwork. Both are required on a non-binding move 810.
  • A volume number with no weight conversion explained. The formula must be in writing 1.
  • A price far below every other written estimate. The Texas guide says some movers advertise a low price and raise it once your items are loaded 13.

If one of these appears, stop and ask for the term in writing. Read avoiding moving scams and choosing a moving company. For a billing dispute, contact your state regulator, or for an interstate move the FMCSA consumer complaint process, or a lawyer.

Rules: federal and state, and where each applies

Federal, interstate household goods moves. 49 CFR 375.401 requires a written estimate that says binding or non-binding, and ties a non-binding estimate’s final charges to actual weight 1.

Section 375.507 requires the mover to determine the weight of each shipment on a certified scale before it assesses charges on a non-binding estimate that depends on weight 5. Section 375.509 sets the origin weigh and back weigh methods 6.

Section 375.511 allows a simpler weighing for shipments of 3,000 pounds or less 7. Section 375.513 gives you the right to observe 8. Section 375.407 caps the demand at delivery at 110 percent 3.

These rules apply to interstate moves, not to moves inside one state.

State, California (intrastate). California’s Maximum Rate Tariff 4, effective January 1, 2023 in the copy we read, sets maximum distance rates per 100 pounds.

Item 80 says the weight used excludes the mover’s pads, empty containers, dollies and hand trucks, and that the mover must obtain a weighmaster’s certificate or weight ticket before delivery and unloading on shipments under distance rates 12.

State, Texas (intrastate). The Texas Department of Motor Vehicles says licensed movers must have a list of all their rates and charges on file with it, called a tariff 13.

Other states. Each state sets its own rules for moves inside it, and they differ. Name your state’s household goods regulator and ask what it requires. Federal vs. state moving regulations explains the split.

Sources: [1] [5] [6]

Weight-based charges vs the other ways to price a move

BasisYou pay forWhere it fitsMain risk
Weight-basedPounds on the scale times a tariff rateInterstate and long-distance moves; see long-distance movingFinal weight can differ from the estimate, within the 110 percent cap on a non-binding move
Hourly ratesCrew and truck timeLocal moves; see local movingAn open-ended total without a written maximum
Flat-rate movingOne agreed total for described servicesMoves that can be sized in advanceServices outside the description cost extra
Binding estimateThe total in writing for listed goods and servicesAny move where you want a fixed priceA fee may be charged to prepare it 1

Weight-based charge myths

Myth The estimate is the price.
Reality Only a binding estimate fixes the price. A non-binding one is a prediction, and final charges follow actual weight 1.
Myth The mover can charge whatever the scale says at delivery.
Reality On a non-binding estimate it cannot require more than 110 percent of the estimate at delivery. The rest is billed later 310.
Myth The mover’s scale is the only one that counts.
Reality It must be a certified scale, you may watch, and you may ask for a reweigh before unloading, at no charge 5810.
Myth A reweigh always lowers the bill.
Reality The final charges follow the reweigh weight, even if it is higher than the first reading 10.
Myth A binding estimate is weighed too.
Reality The FMCSA booklet says no weighing is required for the charge, because weight does not affect it 10. The STB adds that if you chose full value protection without declaring a value, the mover must have the weight recorded at a certified scale 11.

Weight rules differ between California, Texas and the federal rules

The variable is the state regulator and how it treats weight. California’s Bureau of Household Goods and Services publishes Maximum Rate Tariff 4, which states distance rates per 100 pounds, converts cubic feet to weight at 7 pounds per cubic foot for estimating, and lets you ask for a reweigh before delivery.

Unlike the federal rule, which bars a charge for a reweigh and uses the reweigh weight, California uses the lower of two net weights and may allow an added charge when the two weights differ by less than a set margin 12.

Texas relies on a tariff each licensed mover files with the Texas Department of Motor Vehicles 13. Other states differ. Start with your state’s household goods regulator.

When weight pricing matters, and the next step

Weight pricing matters whenever your move crosses a state line or covers a long distance, and whenever you hold a non-binding estimate. It matters less when you hold a binding estimate for the full list of goods and services.

Your next step is to ask each mover for the same four things in writing: the estimate type, the weight it assumes and how it converted any volume, the minimum weight charge, and the maximum it will require at delivery.

Then line the estimates up with the comparison steps for written estimates and check the arithmetic with the truck size tool.

Decision guide Which weight rule applies to this move?
If You hold a binding estimate
Then Weight does not change the charge; check the list of goods and services on it 10
If You hold a non-binding estimate
Then Expect a weighing, a ticket and a 110 percent cap at delivery 310
If The estimate was given by volume
Then Ask for the weight conversion formula in writing 1
If The weight looks wrong
Then Ask for a reweigh before unloading; the final bill uses the reweigh weight 10
If The move stays inside one state
Then The state’s tariff and rules apply, not the federal weighing rules

Questions about Weight-Based Moving Charges

How do movers charge by weight?

They weigh the truck on a certified scale before and after loading, subtract to find your shipment’s weight, and apply a rate from the mover’s tariff. Extras such as stairs and packing are added. On a binding estimate the price is already fixed, so the weight does not change it.

What does cwt mean in moving?

Cwt is short for hundredweight, which is 100 pounds. Some tariffs state rates per 100 pounds. California’s Maximum Rate Tariff 4, for one, lists distance rates in dollars per 100 pounds. Other tariffs may use another unit, so read the one for your mover.

Can the final weight be higher than the estimate?

Yes, on a non-binding estimate. Final charges follow the actual weight. Federal rules still limit what you can be required to pay at delivery to 110 percent of the estimate. The mover bills the rest after 30 days from delivery.

Do I have to be there when the truck is weighed?

No, but you have the right to be. The mover must tell you where and when each weighing happens and give you a reasonable chance to attend. You can waive that right, but only in writing. If you skip it, keep your copy of the weight tickets.

Can I ask for a reweigh?

Yes. If you think the origin weight is wrong, you may ask for a reweigh before the shipment is unloaded. The mover cannot charge you for it. The final charges are based on the reweigh weight, even if that number is higher than the first one.

Is a binding estimate weighed?

Not for the charge. The FMCSA booklet says weight does not affect a binding price, so weighing is not required for billing.

The Surface Transportation Board says that if you choose full value protection without declaring a value, the mover must have the weight recorded at a certified scale.

A mover that bills above a binding estimate without weighing is also prohibited.

What is a minimum weight charge?

It is a floor under the bill. If your load is lighter than the mover’s minimum, the mover must state the minimum cost on the bill of lading. If it does not, it must base your final charges on the actual weight instead.

How do movers turn cubic feet into pounds?

Federal rules require a mover that estimates by volume to explain the conversion formula in writing. California’s tariff multiplies cubic feet by 7 for approximate weight. Another mover may use a different factor, so ask for yours in writing.

Does weight pricing apply to a local move?

Often not. The Arizona Attorney General says in-state moves are usually based on hourly charges. A move across a state line follows federal rules, where a non-binding estimate is tied to actual weight. A move inside one state follows that state’s rules, so ask your state regulator which basis applies.

Where do I report a weight dispute?

Start with the mover in writing and keep the tickets. For an interstate move, FMCSA takes complaints, and its booklet gives a hotline at (888) 368-7238. For a move inside one state, contact your state household goods regulator. A lawyer can advise on a contract dispute.

Sources

  1. 49 CFR 375.401, Must I estimate charges? (read in the eCFR and at Cornell LII), retrieved .
  2. 49 CFR 375.405, How must I provide a non-binding estimate? (read at Cornell LII), retrieved .
  3. 49 CFR 375.407, Under what circumstances must I relinquish possession of a collect-on-delivery shipment transported under a non-binding estimate? (read at Cornell LII), retrieved .
  4. 49 CFR 375.505, Must I write up a bill of lading? (read at Cornell LII), retrieved .
  5. 49 CFR 375.507, Must I determine the weight of a shipment? (read at Cornell LII), retrieved .
  6. 49 CFR 375.509, How must I determine the weight of a shipment? (read at Cornell LII), retrieved .
  7. 49 CFR 375.511, May I use an alternative method for shipments weighing 3,000 pounds or less? (read at Cornell LII), retrieved .
  8. 49 CFR 375.513, Must I give the individual shipper an opportunity to observe the weighing? (read at Cornell LII), retrieved .
  9. 49 CFR 375.521, What must I do if an individual shipper wants to know the actual weight or charges for a shipment before I tender delivery? (read at Cornell LII), retrieved .
  10. Appendix A to 49 CFR Part 375, Your Rights and Responsibilities When You Move (read at Cornell LII; fmcsa.dot.gov returns 403), retrieved .
  11. Surface Transportation Board, Released Rates of Motor Common Carriers of Household Goods, Docket RR 999 (Amendment No. 5), decided January 10, 2012, retrieved .
  12. California Bureau of Household Goods and Services, Maximum Rate Tariff 4 (effective January 1, 2023), Items 80, 108 and 310, retrieved .
  13. Texas Department of Motor Vehicles, Smart Buyer Series: Smart Mover, Tips for a Safe and Successful Household Goods Move (January 2025), retrieved .
  14. Arizona Attorney General, moving consumer tips and household goods mover legislation summary (AZMA), retrieved .
  15. Tennessee Attorney General, Division of Consumer Affairs, Moving Scam Prevention Tips, retrieved .

Expert review

Written by the HyreMover Research Desk. Not yet reviewed by an outside expert. We say so rather than imply a review that has not happened; see our editorial policy.

How the numbers were checked: Rules were read at Cornell LII and in the eCFR (49 CFR 375.401, 375.405, 375.407, 375.505 to 375.521 and Appendix A).

The Surface Transportation Board released-rates decision, the California Maximum Rate Tariff 4 PDF, the TxDMV Smart Mover guide, the Arizona Attorney General sheet and the Tennessee Attorney General tips were re-read on 2026-10-15. The worked example uses invented weights and unit-free money stand-ins.

No price is given. Rules are scope-specific and are not legal advice.

Suggest a correction. We fix errors and say what changed.