Quick answer
Moving truck weight and weigh tickets are the signed records from a certified scale that show the weight of a moving truck, either empty (tare) or loaded (gross), used to work out the weight of your shipment.
Net weight is gross minus tare. On a non-binding estimate, that net weight sets the weight-based part of your bill. Federal rules require a certified scale, a signed ticket for each weighing and your right to watch.
Quick facts
The key facts about Moving Truck Weight and Weigh Tickets, with sources:
- Net weight
- Gross weight (loaded truck) minus tare weight (empty truck) 8
- Scale (interstate)
- A certified scale, meaning one inspected and certified by an authorized scale authority 17
- When weighing is required (interstate)
- Before charges are assessed on a non-binding estimate that depends on weight 715
- Your right to watch (interstate)
- You may observe every weighing and the mover must tell you where and when 1015
- Reweigh (interstate)
- You may ask before unloading, at no charge; charges then follow the reweigh weight 1215
- Ticket contents (interstate)
- Six items, including scale name and location, date, tare/gross/net and your last name 13
Key takeaways
- A weigh ticket is a signed scale record. The empty-truck weighing and the loaded-truck weighing give the weight of your shipment, and each weighing needs a ticket, though one ticket may record both if the same scale was used 813.
- On a federally regulated interstate move with a non-binding estimate, the mover must weigh the shipment on a certified scale before it assesses any charges 7.
- You have the right to watch every weighing. The mover must tell you where and when, and you may give up that right 1011.
- If you think the origin weight is wrong, ask for a reweigh before unloading. The booklet says the mover cannot charge for it and that charges then follow the reweigh weight, even if that is higher 1512.
- These are federal rules for interstate moves. A move inside one state follows that state’s rules, which differ 1617.
A weigh ticket in plain English
A moving truck is too heavy to weigh on a bathroom scale, so movers drive it onto a truck scale, the kind used at large commercial yards. The scale prints a slip. That slip is the weigh ticket. It shows the weight of the truck at that moment and who certified the reading.
Three words appear on it. Tare is the weight of the truck with no shipment aboard. Gross is the weight of the truck with your shipment aboard. Net is what is left when you subtract tare from gross.
Net is the weight of your belongings. Federal rules say weighing may be done in either order: before loading and after loading, or with the loaded truck first and the empty truck after unloading 8.
The scale matters as much as the number. Federal rules define a certified scale as one “inspected and certified by an authorized scale inspection and licensing authority” 1.
On an interstate move with a weight-dependent non-binding estimate, the mover must use a certified scale, not a home scale or its own guess 7. The ticket is the proof that a certified scale gave the reading.
Weigh tickets only matter when weight sets the price. Under a binding estimate, the price is fixed by the items and services listed, so the booklet says weighing is not required because weight does not change your charges 15. Our guide to moving estimates explains the two estimate types and which one you hold.
How a shipment is weighed, step by step
Below is the usual sequence on a federally regulated interstate move that has a non-binding estimate. A state-regulated local move may bill by the hour and never weigh anything.
- The mover tells you where and when. It must give you notice of the time and place of each weighing and a reasonable chance to attend 10.
- The empty truck is weighed. That is the tare weight. Pads, dollies, hand trucks and ramps must be on the truck, and the driver and any helpers must be off it 8.
- The truck is loaded. The crew loads your goods, and the inventory is written at the same time. See how a truck is loaded for what happens before it leaves.
- The loaded truck is weighed again. That is the gross weight. The fuel tanks must be full at both weighings, or no fuel may be added between them if the empty weighing comes first 8.
- The weigh master signs a ticket. Each weighing needs a ticket, and if both weighings used the same scale, one ticket may record both. The weigh master must sign it 13.
- The mover subtracts. Gross minus tare is the net weight of your shipment, and it becomes the billing weight.
- You are told the weight and the charges. You may then ask for a reweigh before unloading starts 12.
- Weigh the empty truckTare weight; ticket signed 813
- Load the shipmentInventory prepared at loading 5
- Weigh the loaded truckGross weight; ticket signed 813
- SubtractNet weight = gross minus tare 8
- Quote the chargesBilling weight and total charges given to you 12
- Reweigh if neededBefore unloading, at no charge 15
The order can be reversed: loaded truck first and empty truck after unloading is also allowed 8. Source: [8] [12] [15]
The ways a shipment can be weighed
| Method | How it works | Source |
|---|---|---|
| Origin weigh | Tare before loading, gross after loading. Net is the difference | The first method in 49 CFR 375.509(a) 8 |
| Back weigh | Gross with the shipment aboard, then tare after unloading | The second method in 49 CFR 375.509(a) 8 |
| Container or trailer weigh | Weigh the container with its pads, blocking and bracing as tare. A detached trailer may be weighed alone if the scale platform holds all of it | 49 CFR 375.509(c) and (d) 8 |
| Platform scale, small shipments | For shipments of 3,000 pounds or less, an approved platform or warehouse scale may be used before loading or after unloading | 49 CFR 375.511 9 |
| Constructive weight | A state may allow a stand-in figure, such as 7 pounds per cubic foot of properly loaded van space, when no scale is available | North Carolina guide and 43 Tex. Admin. Code 218.60 1617 |
Weight versus volume
Some movers quote by volume (cubic feet) and bill by weight. Federal rules say the mover must explain the conversion in writing and tell you the final charge depends on actual weight and the 110 percent rule 2. Ask for the mover’s conversion factor instead of assuming one.
Example: reading two weigh tickets
The weights below are invented to show the arithmetic. They are not a benchmark for any home. The rules cited are real.
| Line | Ticket entry | What it means |
|---|---|---|
| Ticket 1: empty truck | Tare 14,260 lb | Truck, pads, dollies and full fuel tanks; no shipment 8 |
| Ticket 2: loaded truck | Gross 18,410 lb | Same truck, same equipment, shipment aboard 8 |
| Net weight | 18,410 minus 14,260 = 4,150 lb | The billing weight of the shipment |
| Weight in the estimate | 4,000 lb (example) | The weight the non-binding estimate assumed |
| Difference | 150 lb, or 3.75 percent over | Weight-based charges rise in line with the extra weight |
Net weight = Gross weight − Tare weight
Gross weight- Truck weighed with your shipment aboard 8
Tare weight- Same truck, same equipment, no shipment aboard 8
Net weight- The weight of your shipment, used to bill a weight-based charge
For a container shipment, use the container’s tare, including pads, blocking and bracing 8.
Source: [8]
Three checks follow. First, each weighing should be on a ticket that names the scale and its location, and the tickets should carry your last name and the bill of lading number 13.
Second, the truck should be the same one with the same equipment aboard. Third, the net should be close to what the estimate assumed.
At delivery, a mover can demand at most 110 percent of a non-binding estimate, so the remainder of a higher bill is billed later 415. A 3.75 percent gap is well inside that limit.
A gap of 30 percent is a reason to ask for a reweigh.
Where weigh tickets appear: the estimate, the bill of lading and the final invoice
Weight shows up in three places. On the non-binding estimate, it is the weight or volume the mover expects. On the bill of lading, the weight is often blank because it cannot be known before loading.
Federal rules let a mover omit information that cannot be determined before loading 6. On the final invoice, the weight-based charge should rest on the actual weight, and the booklet says each weight ticket must accompany the invoice 15.
The federal rule is even more direct. To collect weight-based charges from an individual shipper, the freight bill must include true copies of all the weight tickets used 13. If a mover sends a bill with a weight but no tickets, ask for them in writing before you pay a disputed amount.
Read the paper trail in order. The bill of lading carries the contract, the inventory lists what was loaded, and the tickets prove what it weighed. See weight-based moving charges for how a rate per pound or per hundredweight turns net weight into a line on the bill.
What weighing does for you, and where it falls short
Why weighing helps
- It ties a weight-based charge to a measured number, not a guess 7.
- It gives you paper to check: the ticket shows the scale, date and vehicle 13.
- You may watch, so the number is not produced out of your sight 10.
- You can ask for a reweigh before unloading, which is the first dispute step the rule gives you 12.
Where it falls short
- Weighing is not required on a binding estimate, so it gives no protection there 15.
- The number depends on the truck’s fuel, equipment and who is aboard, so two weighings can differ by a small amount 8.
- It does not tell you whether the scale was accurate, only that it was certified 1.
- Reweighing after delivery may no longer be possible, so timing is everything 12.
Limits: what a weigh ticket cannot show
A ticket records one weighing. It cannot tell you whether items were left off the truck, whether other households’ goods were aboard during a weighing, or whether the truck was weighed with its fuel tanks full.
Federal rules set those conditions, but you only know they were met if you were there or if the ticket and the paperwork agree 8.
A ticket also does not decide price. Price comes from the tariff and your estimate. A correct weight multiplied by the wrong rate is still a wrong bill. For the full picture of what moves a quote, see what sets the price of a move.
Last, a ticket is not a damage record. For that, use the inventory and the delivery notes, covered under moving inventory.
Our valuation and insurance guide explains how weight and value interact in a claim: under released value the mover’s liability is cents per pound per article, so weight matters in a different way 15.
Do not hand over the only copy of a document
Photograph every ticket, the inventory and the bill of lading before anything leaves your hands.
Do not sign a blank form, and do not pay a demand you disagree with without reading the contract and the rule. This is general information, not legal advice.
The signed contract and the law that applies to your move decide the outcome.
What weight does to the bill: rate, minimum weight and the paper trail
We do not publish prices. Weight matters to a bill in a few ways. On a weight-based tariff, the net weight is multiplied by a rate that depends on distance and services, so more weight means a higher line.
A minimum weight can also apply: the booklet says that if your shipment is under the mover’s minimum weight, the minimum charge must be stated on the bill of lading, and if it is not stated, charges follow the actual weight 15.
Weight is not the only driver. Accessorial services such as stairs, long carries and shuttles are priced apart from weight.
Federal rules cap the charge for impracticable operations that a mover may demand at delivery at 15 percent of the other charges due, with any excess billed later 4.
Use the moving cost calculator to see which inputs move a quote, and the volume estimator to size your load.
None of our sources gives a lifespan for a weigh ticket. What the rules do give is a record trail.
The mover must keep the original ticket as part of the shipment file 13, and an inventory must be kept for at least one year 5.
If you dispute a weight later, those files are what a regulator or arbitrator will ask to see.
How to ask for a reweigh, and when the request must come
The mover arranges the weighing and the weigh master signs the ticket. What you need is timing.
- Ask early. When you book, ask whether the estimate is binding or non-binding and where the truck will be weighed.
- Attend the weighing if you can, or write that you waive the right. Under the federal rules, a shipper who chooses not to watch is presumed to have waived the right to watch the weighing. A waiver of the right to watch a reweigh must be given in writing 11.
- Get the tickets. Ask for a copy of each ticket or a photo of it. Check the six required items 13.
- Compare the weight with the estimate. If the billing weight and total charges look off, say so right away.
- Ask for the reweigh before unloading. The federal rule says the request must come before unloading begins, after you have been told the billing weight and total charges, and only for a shipment weighed at origin by the first method 12. Put the request in writing.
- Note the new weight. The booklet says the final charges use the reweigh weight, even if it is higher 15.
Reweigh is a right, not a favor
The booklet states the mover may not charge you for the reweigh 15. If a mover says a reweigh costs extra, ask it to show the rule, and see avoiding moving scams for what a pressure tactic looks like.
Keeping the weight records after the move
- Keep a copy of every ticket with the bill of lading, the inventory and the final invoice.
- Match the numbers. The last name and bill of lading number on each ticket should match your contract 13.
- Keep the estimate so you can compare the assumed weight with the billed weight. Binding estimates must be kept by the mover for at least one year 3.
- Write down dates. Any claim for loss or damage has a filing window, and on interstate moves it is nine months from delivery 15.
- Store them digitally, not only in a box that is moving with you.
Weight-bill red flags: no tickets, no notice, no reweigh
- No tickets with the invoice for a weight-based charge. Federal rules require true copies 13.
- A weight far above the estimate with no explanation of how the volume was converted 2.
- A weighing out of your sight when you asked to attend, or no notice of where and when 10.
- A refusal to reweigh, or a fee for it, on an interstate move 15.
- Goods held until you pay more than the rules allow. For a non-binding estimate on an interstate move, the booklet says the mover cannot require more than 110 percent of the estimate at delivery 154.
If any of these happen on an interstate move, you can contact the Federal Motor Carrier Safety Administration. The booklet lists (888) 368-7238 for a mover that refuses to deliver unless you pay an amount it is not entitled to charge 15.
For an in-state move, ask your state’s moving regulator. If money is at stake, consider a lawyer. Our guide to choosing a moving company shows how to check a mover before you book.
Rules and standards: 49 CFR Part 375, federal booklet and state rules
Federal, interstate household goods. 49 CFR 375.507 requires weighing on a certified scale before charges when a non-binding estimate depends on weight 7. Section 375.509 sets the methods and conditions 8.
Section 375.511 lets a mover use a platform scale for shipments of 3,000 pounds or less 9. Sections 375.513 and 375.515 give the right to observe and the rules for waiving it 1011.
Section 375.517 gives the reweigh right 12. Section 375.519 sets the ticket contents and says copies must go with the freight bill 13.
Section 375.521 requires notice of actual weight and charges on request, at least one full 24-hour day before delivery, with exceptions such as a destination back weigh 14.
All were read in the eCFR text of Part 375 (Cornell LII mirror) on 2026-10-15.
Federal booklet. Appendix A to Part 375 is the consumer booklet your mover must give you. It repeats these rights in plain language 15.
State, intrastate. A move inside one state is not covered by Part 375.
North Carolina’s guide says its weight-and-distance billing applies to moves of 36 miles or more, that hourly moves of 35 miles or less are not weighed, and that a reweigh may carry an extra charge if the two net weights are close 16.
The Texas rule for weight-based not-to-exceed proposals requires a certified scale and signed tickets, and lets shippers of 1,000 pounds or less use a platform scale 17. These two states are examples, not the rule everywhere.
Weigh tickets compared with other ways of setting a price
| Pricing basis | Does weight set the price? | Are weigh tickets needed? |
|---|---|---|
| Non-binding estimate, interstate | Yes. Final charges follow actual weight, with a 110 percent ceiling at delivery 4 | Yes. Weighing on a certified scale is required 7 |
| Binding estimate, interstate | No. The total is guaranteed from the items and services listed 15 | No, because weight does not change the charges 15 |
| Hourly rate | No. Time and crew size set it | Not for the price; some states still weigh moves over a set distance 16 |
| Flat rate | No. A fixed total for a defined scope | No, if the total is fixed |
| Weight-based charge | Yes. Net weight times a rate | Yes, and copies go with the freight bill 13 |
Weigh ticket myths
- Myth The mover can weigh the shipment however it likes.
- Reality Federal rules require a certified scale and set conditions such as full fuel tanks and no one aboard 78.
- Myth I cannot be there when the truck is weighed.
- Reality You have the right to observe every weighing, and the mover must tell you where and when 10.
- Myth A reweigh always lowers the bill.
- Reality The booklet says final charges use the reweigh weight, even if it is higher 15.
- Myth Every move is weighed.
- Reality Binding estimates and hourly moves are not priced by weight, and the booklet says weighing is not required for a binding estimate 15.
Who sets weighing rules inside one state
The regional variable is the state agency that regulates movers inside its borders. In North Carolina, the Utilities Commission and its Public Staff apply the weighing rules in its moving guide 16. In Texas, the Department of Motor Vehicles administers 43 Tex. Admin.
Code Chapter 218 17. Other states have a public utility commission, a transportation department or no household-goods rule at all. Ask your state regulator which rule covers your move, and read the weighing terms in your contract.
When weight matters to you, and the next step
Weight matters when your estimate is non-binding, when the price is quoted by weight, or when the billed weight is far from the estimate. It matters little on a binding estimate or an hourly move.
Your next step is to find out which estimate you hold, write down the date and place of the weighing, and ask for the tickets. Compare quotes on the same basis with the truck size tool and the moving checklist, and read the weight-related lines on your contract before you sign.
Questions about Moving Truck Weight and Weigh Tickets
What is a weigh ticket in moving?
A weigh ticket is the signed record from a certified scale showing the weight of a moving truck, either empty (tare) or loaded (gross). Subtracting tare from gross gives the net weight of your shipment.
Federal rules require a ticket for each weighing, signed by the weigh master (one ticket may cover both weighings on the same scale), showing the scale name and location, the date, and your last name as it appears on the bill of lading.
How do movers weigh a shipment?
On an interstate move, the truck is weighed empty, loaded, and the difference is your shipment weight.
The rule allows two orders: tare before loading and gross after, or gross first and tare after unloading.
The pads, dollies and ramps must be aboard, no one may be on the truck, and fuel tanks must be full at each weighing.
Can I watch my shipment being weighed?
Yes, on an interstate move. Federal rules give you the right to observe all weighings, and the mover must tell you where and when and give you a reasonable chance to attend.
If you choose not to watch, you are presumed to have waived that right. Waiving it does not remove your other rights under Part 375.
Can I ask for a reweigh?
Yes, on an interstate move that was weighed at origin. Ask before unloading begins and after you have been told the billing weight and total charges. The federal booklet says the mover cannot charge for the reweigh, and the final charges use the reweigh weight, even if that is higher. Put the request in writing.
Do I need weigh tickets with a binding estimate?
No. The federal booklet says weighing is not required for a binding estimate, because the total is guaranteed from the quantities and services listed and weight does not change the charges.
Weigh tickets matter on non-binding estimates and on weight-based charges. Check which estimate type your paperwork shows. A mover may still weigh a shipment, but the binding total does not move with the weight.
What is the difference between tare, gross and net weight?
Tare is the weight of the truck without your shipment, gross is the weight of the truck with your shipment aboard, and net is gross minus tare. Net is the weight of your belongings.
For a containerized shipment, the container’s tare includes its pads, blocking and bracing. Tare and gross are weighed on a certified scale, and each weighing is recorded on a ticket the weigh master signs.
What must be printed on a moving weigh ticket?
Federal rules list six items: the complete name and location of the scale, the weighing date, whether each entry is tare, gross or net, the identification of the vehicle, your last name as it appears on the bill of lading, and the mover’s shipment registration or bill of lading number.
The weigh master must sign it.
What if the weight is much higher than the estimate?
Check the tickets first, then ask for a reweigh if you have not unloaded yet.
On a non-binding interstate estimate, the mover cannot require you to pay more than 110 percent of the estimate at delivery, and the rest is billed later.
If the mover quoted by volume, it must explain the volume-to-weight conversion in writing.
Do these rules apply to a local move?
Not automatically. 49 CFR Part 375 covers interstate household goods moves. A move inside one state follows that state’s rules, which vary.
North Carolina and Texas have weighing rules for certain intrastate moves, and many local moves are hourly and not weighed. Ask your state regulator or read your contract.
Ask the mover whether your move will be weighed and on what scale.
Where can I report a problem with weighing?
For an interstate move, contact the Federal Motor Carrier Safety Administration. The federal booklet lists (888) 368-7238 for a mover that will not deliver unless you pay an amount it is not entitled to charge. For an in-state move, contact your state’s moving or consumer-protection regulator, or a lawyer for advice on your situation.
Sources
- 49 CFR 375.103, Definitions (certified scale), via Cornell LII, retrieved .
- 49 CFR 375.401, Estimating charges (physical survey; volume-to-weight conversions), via Cornell LII, retrieved .
- 49 CFR 375.403, Binding estimates, via Cornell LII, retrieved .
- 49 CFR 375.407, Non-binding estimates and the 110 percent rule, via Cornell LII, retrieved .
- 49 CFR 375.503, Must I write up an inventory?, via Cornell LII, retrieved .
- 49 CFR 375.505, Must I write up a bill of lading?, via Cornell LII, retrieved .
- 49 CFR 375.507, Must I determine the weight of a shipment?, via Cornell LII, retrieved .
- 49 CFR 375.509, How must I determine the weight of a shipment?, via Cornell LII, retrieved .
- 49 CFR 375.511, Alternative method for shipments of 3,000 pounds or less, via Cornell LII, retrieved .
- 49 CFR 375.513, Opportunity to observe the weighing, via Cornell LII, retrieved .
- 49 CFR 375.515, Waiving the right to observe each weighing, via Cornell LII, retrieved .
- 49 CFR 375.517, May an individual shipper demand re-weighing?, via Cornell LII, retrieved .
- 49 CFR 375.519, Must I obtain weight tickets?, via Cornell LII, retrieved .
- 49 CFR 375.521, Notice of actual weight or charges before delivery, via Cornell LII, retrieved .
- Appendix A to 49 CFR Part 375, Your Rights and Responsibilities When You Move, via Cornell LII, retrieved .
- North Carolina Utilities Commission, Moving Guide (intrastate household goods), retrieved .
- 43 Tex. Admin. Code 218.60, Determination of Weights, via Cornell LII, retrieved .
Expert review
Written by the HyreMover Research Desk. Not yet reviewed by an outside expert. We say so rather than imply a review that has not happened; see our editorial policy.
How the numbers were checked: Each federal section was read at the Cornell LII mirror of 49 CFR Part 375 on 2026-10-15 (fmcsa.dot.gov and ecfr.gov return 403 to automated fetch).
The North Carolina guide and the Texas administrative rule were read the same day and are shown as intrastate examples only. The weights in the worked example are invented for arithmetic and are labelled so. No price is given. General information, not legal advice.
Suggest a correction. We fix errors and say what changed.