HyreMover

HyreMover tools

Moving weight calculator

Type your cubic feet. The tool multiplies by a density you can change, converts to hundredweight and checks the weight on your scale tickets.

7 lb per cu ft editable planning density A HyreMover planning figure, not a measurement. Your mover must explain its own conversion in writing.

The short answer

A moving weight calculator multiplies your cubic feet by a density. At our planning figure of 7 lb per cubic foot, 1,000 cu ft is about 7,000 lb, or 70 hundredweight.

Interstate moves are often priced by weight, so the real number comes from certified scale tickets: gross weight minus tare weight. You have the right to watch the weighing and ask for a free reweigh.

Enter your cubic feet

Cubic feet from the volume estimator or your mover's survey. Scale tickets are optional.

From the volume estimator or the survey on your estimate.

HyreMover planning figure. Overwrite it with your mover's factor.

— Estimated shipment weight
— In hundredweight
— Released value ceiling
— Scale ticket check

What this assumed

—

Arithmetic on figures you supplied. Not a weight ticket and not a quote. HyreMover does not move household goods.

How this calculator works

estimated lb = cubic feet × density
cwt          = lb ÷ 100
net lb       = gross ticket − tare ticket
released cap = lb × 0.60 (per article, in dollars)

The density default of 7 lb per cubic foot is ours. HyreMover editorial figure. Household goods are conventionally converted at roughly 7 lb per cubic foot for planning.

49 CFR 375.401(e) requires a mover using a volume-to-weight conversion to explain its own factor in writing — so ask for theirs rather than assuming ours.

The 60 cents per pound per article is federal: Under this option, the mover assumes liability for no more than 60 cents per pound, per article.

What each input means

Inputs on this tool, in the order they appear on the form.
InputWhat it is actually asking
Cubic feet The volume of everything going on the truck, furniture included. Take it from the volume estimator or the survey on your estimate.
Density Pounds per cubic foot. A book-heavy home runs above the default; a home of upholstered furniture runs below.
Gross and tare The two numbers on certified scale tickets. Net weight is the difference and is what a weight-based bill uses.

Worked examples

Including one where the naive answer misleads, which is the example most calculators leave out.

A two-bedroom at 900 cu ft

900 × 7 = 6,300 lb, 63 cwt. If the tickets show 26,300 gross and 19,500 tare, the net is 6,800 lb, 8% above the estimate. Within the normal range for a book-heavy home.

The ticket that is too high

Same estimate, but the tickets net 8,000 lb: 27% above. Ask to watch a reweigh before unloading. The mover cannot charge for it.

What changes the result

Density moves the answer most. At 5 lb per cubic foot, 900 cu ft is 4,500 lb; at 9 it is 8,100 lb. That spread is why the scale ticket, not the estimate, decides a weight-based bill.

When not to use this

Do not use this as a weight ticket, a quote or a lifting guide. Pianos, safes and appliances are jobs for a trained crew. You have the right, and your mover must inform you of your right, to observe all weighing of your shipment.

Related on this site

Questions this calculator answers

How much does a household move weigh?
It depends on what you own. Multiply your cubic feet by a density. Our planning figure is 7 lb per cubic foot, so 1,000 cu ft is about 7,000 lb. Books and tools are denser; sofas and bedding are lighter.
What is hundredweight (cwt)?
One hundred pounds. A 7,000 lb shipment is 70 cwt. Interstate estimates are often written as a rate per cwt, which is why the tool shows both.
How is the real weight measured?
On a certified scale. The truck is weighed empty (tare) and loaded (gross). The difference is your net weight. You may watch the weighing and ask for a reweigh before unloading at no charge.
Why does my weight ticket differ from the estimate?
Because the estimate used an average density and your goods are not average. A gap of a few percent is normal. A large gap is a reason to ask for the reweigh and to compare the inventory with what was loaded.
Does weight affect what I get back if something breaks?
Under released value, yes: the mover owes at most 60 cents per pound per article. Full value protection is the default unless you waive it in writing, and it pays to repair or replace.

Sources and methodology

Figures dated October 26, 2026. Last reviewed .

Related

Plan Your Move Back to the homepage